1.Clean and trim the surface,mix the morter standby.
(Suggest to use bond made from King-Gem Stones)~
2.Put the culture stone on the ground spread out with the most reasonable aesthetic effect,then choose to fix.
3.Covarage must be completed between the mortar bad and back surface of the stone.
4.Select to install the comer pieces first.
5.Appty the flat pieces toward the wall center base on the comer pieces.
6.Position alrge first,then trim and fit the smaller pieces.
7.You can use tools to trim the edge and adjust the size when install.
8.Need to press each stone into the mortar seting bed tirmly enough to ensure a good bond after finished all the install,the finished job should
be broomed or brushed to remove loose mortar and to clean the face of the stone.
|
